Browse Product Categories
- Optical
- Flash Memory
- HDD/SSD
- NAS/DAS/SAN
- Tablet PC
- UPS and Racks
- Software
- Tape
- Audio/Visual
- Connectivity
- Peripherals & Accessories
- Security & Surveillance
Qsan P500Q-D424 72TB 4U 24 Bay 10GbE-SATA
Part number: 54364Manufacturer product ID: P500Q-D424/72TB
EAN Code: EAN5051868543647
Box quantity: 1*
Sub-category: Rackmount
Manufacturer: Qsan
Interface: 10GbE
Weight (Kg): 26.00
Warranty period: 36 Months
Designed for high availability, non-stop services, applications demanding high throughput, and flexible storage planning
Key Features- Two 10GbE iSCSI ports per controller
- Up to 220K IOPS & 1300MB/Sec. throughput
- High connection availability: load balancing & failover
- Hardware 10Gb iSCSI offloaded engine
- Extendable capacity up to 144TB
P500Q iSCSI system is specially designed for high availability applications. The P500Q has fully redundant components including redundant RAID controllers, power supplies, fan modules, battery backup modules and SAS JBOD expansion ports. All of these components are hot-swappable to create a high availability platform and provide non-stop services. Special features in firmware are RAID 6, 60 support, QSnap writable snapshot, Windows VSS support, and volume configuration restoration. All these features are designed to add an extra layer of protection to your valuable data. To raise the bar higher, P500Q can upgrade firmware without system down time. Both firmware image and volume handling are well protected by the redundant RAID controllers. When one RAID controller is down or disconnected, the other RAID controller will take over all tasks immediately and seamlessly.
P500Q IOPS is 220,000 at maximum, much higher than other storage systems within the same segment in the current market; besides, its throughput is 1300MB/Sec. at maximum.
The optimized IOPS and throughput are capable of providing run-time critical online services, such as Cloud storage, SQL, Exchange, and high-end surveillance storages. Furthermore, with the 10GbE iSCSI interface, P500Q is ideal for virtualization environments - VMWare, Hyper-V, and Citrix. Users can install up to 32 OSes in the 10GbE iSCSI system through the Boot-from-SAN feature. With this feature, the multiple OSes/Servers can be managed easily and well protected by Qsan’s advanced data protection features, and there will be no system downtime caused by single point of failure.
All P500Q systems are equipped with Qsan’s default green features for power saving. In most cases, the hard drives consume most power. With the auto disk spin down feature and proper configuration, the power consumption of hard drives can be reduced to a minimum, and users will not even notice this feature. P500Q monitors the environment temperature for cooling mechanism and the fan modules respond accordingly. The power supply modules are all 80 PLUS power efficient for better power converting rate. In virtue of the reduction of hard drive power consumption, the advanced cooling mechanism, and the energy-efficient power supplies, the unnecessary power cost is decreased greatly.
*Box quantity refers to the number of units contained in
this product's outer packaging. It does not refer to the
number of products purchased for the quoted unit price unless otherwise stated.
